JVC AV 30W777 manual Adjust the Sound Settings, Optical Out, To Sound Adjust

Sound Adjust

Sound Settings

These settings allow you to change and adjust the sound on your television.

Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with the bass adjustment.

Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.

Balance – Adjust the level of sound between the TV’s left and right speakers with the balance setting.

Adjust the Sound Settings

	Press the MENU button
π†	To "Sound Adjust"
è	To enter
π†	To "Bass", "Treble" or "Balance"

è To adjust the setting

π† To move to the next setting

Press the MENU button when finished

Sound Adjust

Bass		0
Treble		0
Balance		0
Optical Out			PCM
Turn On Volume			Current
Volume Limit			20
			Reset
		BACK	MENU
Select	Operate	Back	Exit

Notes:

•You can reset all sound adjustments you set at once as the default setting when you select reset. See page 48.

Optical Out

You can select the optical digital sound output, either PCM or Dolby Digital when your TV is connected to an amplifier that has Dolby Digital decoder. If you select Dolby Digital, you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects digital channels.

Press the MENU button

π† To "Sound Adjust" √® To enter

π† To "Optical Out"

è To select "PCM" or "DOLBY DIGITAL" Press the MENU button when finished

Sound Adjust

Bass		0
Treble		0
Balance		0
Optical Out			PCM
Turn On Volume			Current
Volume Limit			20
			Reset
		BACK	MENU
Select	Operate	Back	Exit

Notes:

•If your amplifier does not have Dolby Digital decoder, select PCM. If you don't select PCM, it cannot output the sound from the speakers.

•For connecting an amplifier using the optical output, see page 16.

Manufactured under license from Dolby Laboratories. "Dolby", and the double-D symbol are trademarks of Dolby Laboratories.

49