Teletext

Picture

You can change Picture Mode settings by pressing “PIC- TURE” button when no menu appears.

VCR / DVD Control Buttons and VCR / / DVD Switch

The buttons can be used to operate a JVC brand VCR or DVD player. Pressing the button having the same appear- ance as the original remote control button of a device makes the function work in the same way as the original remote control.

1.Set the VCR / / DVD Switch to the VCR or DVD posi- tion.

VCR:

When you are operating the VCR, set the switch to the VCR position.

DVD:

When you are operating the DVD player, set the switch to the DVD position.

(Text):

When you are viewing Teletext programmes, set the switch to the (Text) position.

2.Press the VCR / DVD Control Button to control your VCR or DVD player.

Note:

•If your device is not made by JVC, these buttons cannot be used.

•Even if your device is made by JVC, some of these buttons or any one of the buttons may not work, depending on the device.

•You can use the / buttons to choose a TV channel which the VCR will receive or choose the chapter which the DVD player plays back.

•Some DVD player models use the / buttons for oper- ating of Fast forward/backward functions and choosing the

chapter. In this case, the / the buttons do not work.

Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).

No on screen display will be available in text mode.

No contrast, brightness or colour control, but volume control is available in text mode.

To operate Teletext

•Select a TV station on which Teletext is being transmitted.

•Press (teletext) “” button. Usually the list of contents (in- dex) is displayed on the screen.

•Set the VCR / / DVD switch to the (Text) position.

ENGLISH

To select a page of Teletext

•Press the appropriate digit buttons for the required Teletext page number.

The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.

• Press ““ button to move the Teletext screen forward one page at a time.

•Press “” button to move the Teletext screen backward one page at a time.

To Select Index Page

•To select the page number of the index (generally page 100), press ““ button.

Searching for a teletext page while watching TV

•In the Teletext mode pressing ““ button will switch the screen to the TV mode. In the TV mode enter a page num- ber using digit buttons. As you enter last digit of page num-

ber, “” sign will replace the page number and flash until the entered page number is found. Then the page number will replace “” sign again. Now you can display this tele- text page pressing ““ button.

To Select Double Height Text

•Press ““ button for the top half of the information page to be displayed in double height text.

•Press ““ button again for the bottom half of the informa- tion page to be displayed in double height text.

•Press ““ button once more for the full page of normal height text.

To Reveal “concealed” Information

•Pressing ““ button once will reveal answers on a quiz or games page.

•Pressing ““ button again will conceal the revealed an- swers.

To Stop Automatic Page Change

The teletext page you have selected may contain more infor- mation than what is on the screen; the rest of the information will be displayed after a period of time.

•Press ““ button to stop the automatic page change.

•Press ““ button again to allow the next page to be dis- played.

To Select a Subcode Page

Subcode pages are subsections of long Teletext pages that can only be displayed on the screen one section at a time.

•Select the required Teletext page.

-13 -