Connect the External Equipments

•Press ““ button.

•Select the required subcode page number by pressing four digit buttons (e.g. 0001).

•If the selected subcode page is not displayed in a short

time, press ““ button. TV programme will be displayed on the screen.

•Teletext page number will be displayed on the upper left corner of the screen when the selected page is found.

•Press ““ button to display the selected Teletext page.

To exit Teletext

• Press “” button. The screen will switch to TV mode.

Fastext and Toptext

Teletext mode will be selected according to transmission au- tomatically.

Your CTV supports the 7 page Teletext system. When the page number of any of the 7 pages in memory is entered, the system will not search for the requested page; instead it will display the page automatically.

• Press ““ button to move the Teletext screen forward one page at a time.

•Press “” button to move the Teletext screen backward one page at a time.

For Fastext and Toptext

The subject-heading for the information may have a particular colour or can be in a form located in a coloured box.

•Press an appropriate RED, GREEN, YELLOW or BLUE but- ton in order to reach the relevant page quickly.

For TOPTEXT

If Toptext transmission is present, colour coded buttons will appear in status row.

If Toptext transmission is not present, status row will not ap- pear.

In Toptext mode the ““ or “” commands will request the next or previous page respectively. If Toptext transmis- sion is not available, in case of operation of these com- mands, wraparound occurs. For example page 100 appears to be one greater than page 199.

Via the Euroconnector

Your TV set has three Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the EXT.1 (EXT-1), EXT.2 (EXT-2) or EXT.3 (EXT-3) terminals.

If an external device is connected via Euroconnector sockets TV is switched to AV mode automatically.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT.1 terminal. If not, the T-V LINK function will not work properly.

•When connecting a T-V LINK compatible VCR to the EXT.1 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly. And then set the DECODER(EXT-2) function for the channel to ON to un-

scramble a scrambled channel. For details, see “Using the Decoder (EXT-2) function” on page 11.

RGB mode

If an equipment can output the RGB signals, connect it to the EXT.1 (EXT-1) terminal.

EXT-2S Mode

If the equipment connected to your TV set supports S-Video (Y/C) output from Euroconnector, you can have a better pic- ture quality by selecting EXT-2S mode and connecting your equipment to the EXT.2 (EXT-2S) terminal of TV. See your equipment's booklet to check if your equipment has such feature.

Via the RCA jacks

If you have an equipment (such as a Camcorder) which has the RCA jacks, connect it to the Front AV (EXT-4) terminal with the video and audio cables.

•If the equipment has the mono audio jack, connect it to the AUDIO-L jack.

Via the ANT (aerial) socket

If your equipment does not have an Euroconnector or RCA jacks, connect it to the TV with an aerial cable. For details, see the manual provided with the equipment.

•To store the test signal that comes from the equipment, see “INSTALL Menu” on page 10 and store it to the pro- gramme number 0. You can watch images from that equip- ment to select the programme number which you stored the test signal.

TV and Video Recoder (VCR)

•Connect the Video Recorder to the ANT (antenna input) socket of the TV with the aerial cable.

•Connect the Video Recorder to the EXT.1 (EXT-1), EXT.2 (EXT-2) or EXT.3 (EXT-3) terminal with the SCART cable, or connect it to the Front AV (EXT-4) terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV“ button to select the corresponding AV mode.

NTSC 3.58/4.43 system is detected automatically in AV mode.

Copy Facility

You can output the video and audio signals which inputs from TV, EXT.1 (EXT-1) or EXT.3 (EXT-3) terminal to the video re- corder connected to the EXT.2 (EXT-2) terminal.

•To select the output source, see “Setting External Source Output” on page 10.

Connecting Headphones

Use the stereo headphone socket of your TV, to connect headphones.

ENGLISH - 14 -