16 P L U G I N M E N U
NOTE:
You must have the clock set to operate the On/Off Timer.
SET CLOCK
The Clock is the heart of all timer functions. The clock must be set before the timer functions to work.
To SET CLOCK
To operate
TIME |
START CLOCK
To set the hour (AM/PM)
To move to minutes
To set the minutes
To move to START CLOCK when done with settings To start the clock
THANK YOU !!
Continued from below…
To YES/NO
Choose YES
TIME |
START CLOCK
Proceed to set the clock as in the
previous column.
If you choose NO, you will receive the
following message:
YOU CANNOT OPERATE
ON/OFF TIMER !
FINISH
Note: If you attempt to “Start Clock” without setting the time you will receive this message:
Once you have set up the items in the Plug In Menu you must select Finish.
INCORRECT TIME
PLEASE TRY AGAIN
CLOCK — ON/OFF TIMER
MESSAGE
If you do not set the clock but attempt to use the On/Off Timer, you will get the following message:
POWER INTERRUPTED
WOULD YOU SET CLOCK
FIRST?
YES
NO
To FINISH
To exit
Note: You can reset the preferences that you set here in the Plug In Menu via the regular JVC Menu system.
Continued above…