|
| T R O U B L E S H O O T I N G 25 |
|
|
|
| PROBLEMS | CHECK |
| No power | • See if the power cord became unplugged. |
|
| • Perhaps you have experienced a blown circuit breaker or fuse or a power outage. |
|
|
|
| No picture or sound | • The antenna could be disconnected. |
|
| • The Input mode (TV or video) could not be set properly, refer to page 23. |
|
| • The tuner mode (in the menu selection) could be set improperly, refer to page 15. |
|
| • The station may be having difficulties, check to see if other channels are operating normally. |
|
|
|
| Remote control is | • Check that the batteries are still working and properly installed. |
| not operating | • Make sure there are no objects blocking a clear path from the remote to the TV. |
|
| • Check that the |
|
|
|
| You cannot select a | • Maybe you are too far from the TV, you must be within 23 feet (or 7 meters). |
| certain channel | • Make sure the channels are programmed. See Channel Summary, page 17. |
|
| • Perhaps the channel is locked, select it with the 10 key pad and follow instructions. |
|
|
|
| Power turns off | • Perhaps the On/Off Timer is set, press the power button, check page 20. |
|
| • The power was interrupted or the power cord unplugged. |
|
| • The Sleep Timer may be set, see page 22. |
|
|
|
| The clock is wrong | • The clock needs to be reset. See page 16. |
|
|
|
| PICTURE | CHECK |
| Poor color quality | • Tint and color may be improperly adjusted. Check page 18. |
|
| • Video Status mode may be set to an inappropriate setting. Check page 18. |
|
|
|
| Lines or streaks | • There could be interference from another energy consuming appliance, such as a computer, |
| across the screen | another TV or VCR. Move any other such appliances farther away from the TV. |
|
|
|
| Spotted picture | • There could be interference from a running high wattage appliance such as a |
|
| cleaner, or neon sign. You will have to move the antenna away from the source of the interfer- |
|
| ence or change it to a coaxial cable which is less prone to interference. |
|
|
|
| Double picture | • A building or airplane can reflect the original signal producing a second, delayed one. Adjust |
| (Ghosts) | the antenna position. |
|
|
|
| Snowy picture/ | • The antenna may be damaged, disconnected or turned. Check the antenna connection, |
| Image noise | pages 6 to 7. If it is damaged, you will have to replace it. |
| Screen is 80% black | • Closed Caption Text Mode is on. Press the CLOSED CAPTION button until you select Off. |
|
|
|
| SOUND | CHECK |
| Bilingual or stereo | • Make sure the MTS mode is properly set. Refer to page 19 for details on setting MTS Modes. |
| programs can’t be heard |
|
| No sound from TV | • TV Speakers may be turned off in the menu, see page 21. |
| speakers at all |
|
|
|
|
| NOT A PROBLEM | DON’T WORRY ABOUT THIS, IT’S NORMAL |
|
|
|
| Static electricity | • It is normal to feel a surge of static electricity if you brush over or touch the screen. |
|
|
|
| Occasional | • It is normal for the TV to emit crackling sounds when turned on or off. Unless the sound or |
| crackling sounds | picture become abnormal, this is fine. |
|
|
|