Initial Setup
Set Lock Code
Channel guard and
Press the MENU button
π† To SET LOCK CODE
è To operate (lock icon appears)
Press ZERO to access the lock code
The first digit will be highlighted
è To select the number
π† To move to the next digit
� � � � � � � � � � � � �
� � � � � � � � � � �
� � � � � � � �� � � �
� � � � � �
� � � � � � � �
� � � � � � � � � � � � � � � � � � �
Continue to follow these directions for all four numbers
π† To FINISH
è To save settings and exit (your lock code is now set)
Press the EXIT button when finished
When a viewer attempts to watch a blocked channel, this message appears:
��������������� �������
���������� �������
������ ����� ���� ���� ��
����� ��� �� ������ ���
���� � � �
The channel will remain blocked until the correct lock code is entered (see above for information on setting your lock code).
Notes:
•After a power interruption you must reset the lock code.
•Write your lock code number down and keep it hidden from potential viewers.
•If you forget the lock code, a new code may be set using the steps listed above.
31