Initial Setup
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip ahead to “Channel Summary” to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
Press the MENU button
π† To AUTO TUNER SETUP √® To operate
è To choose CABLE or AIR
π† To move to START √® To start Auto Tuner Setup
NOW
PROGRAMMING !
48
Programming will take approximately
1 to 2 minutes.
PROGRAMMING OVER!
• Noise Muting will not work during Auto Tuner Setup.
Note:
•Some cable systems experience interference from radio frequencies on cable Channel 95. You may delete this channel from your scan by removing the “X” next to it on the Channel Summary screen shown on the next page.
17