Quick Setup 2
Step Two - Making Basic Connections
Next you will need to connect your television to an antenna or cable system. The most basic antenna/cable connection is shown below. For more detailed connections, such as ones where a cable box is required, see pages 15 to 16.
WALL
CABLE or ANTENNA
OUT
Cable/RF connector
Illustration of AV-32360
1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.
You may also wish to connect a VCR at this point. A basic VCR connection is shown below. For detailed instructions on connecting a other components or a home theater system, see pages 15 to 17.
Note: A VCR is not required to operate your television.
IN
OR
OR
VCR
AV Cables/Plugs
Illustration of
1)Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an
2)Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.
3)Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.
Finally, once you have finished your connections, plug the power cord into the nearest power outlet and turn on the television.
12 | Proceed to Step Three |