JVC AV 27D202, AV 27D302, AV 27230 manual Channel Summary, Channel Guard Message, All 181 channels

FD mini-IB 1/16/01 3:33 PM Page 21

Initial Setup

Channel Summary

Channel Summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or

all 181 channels.

	Press the M				ENU	button
❷	To CHANNEL SUMMARY
➛❿	To operate
		CH	ADD				:		CH	ADD
		01						:	06
		02		X				:	07		X
		03						:	08
		04		X					09		X
								:
		05		X				:	10

The Channel Summary screen (below) will now be displayed with the channels set to scan marked

with an "X". You can delete channels from the scan by removing the "X". If any channels were missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the channel number.

❷ To the ADD column

➛❿ To include or delete from scan

EXIT when finished

You can block access to a channel by activating the Channel Lock.

❷ To CHANNEL SUMMARY

➛❿ To operate

❷ To the Lock Column

ZERO to lock or unlock that channel

EXIT when finished

Channel Guard Message

When a viewer attempts to watch a guarded channel, the following message appears:

THIS CHANNEL IS LOCKED BY CHANNEL GUARD.

PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.

NO. - - - -

To watch a channel that you have locked, enter the Lock Code using the 10 key pad.

If the wrong code is entered, the message “INVALID LOCK CODE!” will flash on the screen:

The channel cannot be accessed until the correct code is entered.

•Once a channel has been unlocked, it will remain unlocked until the television is turned off.

•See also “Set Lock Code”, page 29.

21