FUNAI CR320IL8 owner manual Glossary, Maintenance, Atsc, Ntsc, Sap

Page 36

GLOSSARY

ATSC

Acronym that stands for Advanced Television Systems Committee and the name of the digital broad- casting standards.

High Definition TV (HDTV)

Ultimate digital format that pro- duces high resolution and high picture quality.

Letterbox

Letterbox refers to the format dis- playing a wide-screen picture on a standard 4:3 aspect ratio televi- sion screen with black bars above and below. It is used to maintain the aspect ratio of the original source such as a motion picture (16:9 or wider).

NTSC

Acronym that stands for National Television Systems Committee and the name of the current ana- log broadcasting standards.

SAP

(Secondary Audio Program)

Second-audio channel delivered separately from main-audio chan- nel. This audio channel is used as an alternate in bilingual broad- casting.

Standard Definition TV (SDTV)

Standard digital format that is sim- ilar to the NTSC picture quality.

S-Video output

It delivers independently each sig- nal of color(C) and luminance (Y) to TV as video signals, so that higher-quality picture will be gained.

MAINTENANCE

CABINET CLEANING

•Wipe the front panel and other exterior surfaces of the TV with a soft cloth immersed in lukewarm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV. Such chemicals may cause damage and discoloration to the exposed surfaces.

PICTURE TUBE CLEANING

Wipe the picture tube of the TV with a soft cloth. Before cleaning the picture tube, disconnect the power cord.

SERVICING

Should your unit become inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power cord and please call our help line mentioned on the front page, to locate an Authorized Service Center.

DEGAUSSING

A degaussing circuit in this unit clears up color errors on the TV screen. Color errors occur when there is any excess magnetism close to the unit. This circuit is designed to operate once when the unit is first plugged in.

If you see minor color errors on the screen, unplug the unit for approximately 30 minutes.

36

When you plug in the unit again, the degaussing cir- cuit will operate to clear errors. Take this step any time the TV screen is accidentally magnetized or when you move the unit.

IR SIGNAL CHECK

If the remote control doesn’t work properly, you can test if the remote control sends out the infrared sig- nal with AM radio or a digital camera (including built- in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station

with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control unit is working.

•With a digital camera (including

built-in camera of cellular phone): Direct a digital camera to remote con- trol, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

EN

Page 35 Page 37
Image 36
Page 35 Page 37
Contents CR320IL8 Important Safeguards Important Safeguards Figure aSupplied Accessories PrecautionsRADIO-TV Interference Dealer Purchase fromFeatures Supplied Accessories / Precautions / FeaturesDTV/TV/CATV ChipContents Contents / Preparation for USE Preparation for USEConnection Connection to CABLE/SATELLITE BOX Component ConnectionExternal Connection Using Front A/V Connection Digital Audio ConnectionCated inside battery compartment of the remote Battery PrecautionsFeatures of digital broadcasting ControlRemote Control and Control Panel Function FunctionsInitial Settings Watching TVLanguage Selection Time ZoneSet the Auto Preset CH You can exit the initial Auto Preset menu by pressing MenuChannel Selection Watching TVDTV/ TV ChannelVolume Adjustment Switching AudioMute AudioWhen using component video cable for con- nection Screen InformationInfo Program air timeSwitching External Input When using VIDEO-2 Input jackWhen using Component Input jacks When using S-VIDEO Input jackOptional Settings Sleep TimerWatching TV / Optional Settings Menu ScreenPicture Adjustment Select Caption Using CH K/L, select Caption Caption Mode C1, C2Closed Caption Select DTV SET UP Using CH K/L, select DTV SET UP Select Dtvcc Using CH K/L, select DtvccText size of the displayed caption can be switched as below Press VOL Following screen is displayedOptional Settings Chip TV RatingMenu VOL Set Mpaa Rating Using the CH K/L, select the rating Mpaa RatingTo exit the menu, press Menu Change Code Settings LetterboxZoom Other Settings Auto Preset CHSelect Channel SET Using CH K/L, select Channel SET DTV/TVOther Settings Press VOL Using CH K/L, select Auto Preset ChdtvWhen scanning both TV and DTV at the same time Press VOL Using CH K/L, select Auto Preset CHTV/DTVUsing CH K/L or the Number buttons, select the channel Channel ADD/DELETELanguage Selection OtherMenu VOL X / Y Set D.S.T. Daylight Saving Using VOL X/Y, set to on or OFF Select Time Zone Using CH K/L, select Time Zone Time ZoneTroubleshooting Guide Before calling for service, check the following chart againMiscellaneous Miscellaneous Maintenance GlossaryAtsc NtscSpecifications Miscellaneous / SpecificationsWeight Lbs .0kg Sound output 2W, 8 ohm xLimited Warranty Warranty Statement Regarding NON Authorized RepairsDuration Limits and Exclusions
Top Page Image Contents