Picture settings, Audio settings, Volume

PICTURE

BRIGHTNESS

CONTRAST
COLOUR
SHARPNESS
SMART CONTROL		USER
●	SELECT	EXIT
	AND EDIT
OK

BACK

SETTINGS ______________________________________________

Picture settings

1Press »i« to open the »INFO« menu.

–The »INFO« menu appears.

2Select »PICTURE« with »P+« or »P-« and confirm with »OK«.

–The »PICTURE« menu appears.

3Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or »SHARPNESS« with »P+« or »P-« and adjust them with »« or »«.

Notes:

After a short while the »PICTURE« menu reappears.

The settings are saved as the »USER« picture default setting.

4Press »i« to finish the settings.

SOUND

VOLUME

BALANCE
SOUND TYPE		MONO
SOUND MODE		NORMAL
EQUALIZER
●	SELECT	EXIT
	AND EDIT
OK

BACK

Audio settings

1Press »i« to open the »INFO« menu.

–The »INFO« menu appears.

2Select »SOUND« with »P+« or »P-« and confirm with »OK«.

–The »SOUND« menu appears.

Note:

Further operation is explained in the following sections.

Volume

The standard volume is set here. This is the volume of the device after switching on.

1Select »VOLUME« with »P+« or »P-« and adjust the setting with »« or »«.

Balance

1Select »BALANCE« with »P+« or »P-« and adjust the setting with »« or »«.

Stereo / two channel, mono

If the device receives two channel programmes, e.g. a film with the original sound on sound channel B (display: »Dual II «) and the dubbed version on sound channel A (display: »DUAL I«), you can select the sound channel you desire.

If the device receives stereo or Nicam programmes, it switches automatically to stereo sound (display: »STEREO«).

You can switch the sound to »MONO« if the stereo reception quality is poor.

1Select »SOUND« with »P+« or »P-« and adjust the setting with »« or »«.