External equipment connection
You can connect to your television many compatible sound and picture devices.
AV inputs:
Press the AV button on the UK repeatedly. You may see the options through which you can enter.
AV1: Select this option for watching the picture of the broadcast device connected to the Scart
1.(You can watch via this Scart if there is a RGB output from the device with which you made a connection).
AV2: Select this option for watching the picture of the broadcast device connected to the Scart
2.(You can watch via this Scart if there is a RGB output from the device with which you made a connection).
AV2S: sVHS support from Scart 2.
AV3: Select this option for watching the picture of the broadcast device connected to the Chinch.
Connecting a Video Recorder Device
Via the SCART socket
Before making the connections, make sure first that your television and the video recorder device are turned off.
Connect one end of the Scart socket cable (not supplied with the television) to the suitable connection terminal of the video recorder device and the other end to the Scart connection point behind your television.
Turn on your television and video recorder device.
By pressing the (
) button on your AV remote control, select the input AV1, AV2 to which you connected your device.
AV3S: Select this option for watching the picture of the device connected when using an
COMP: Select this option when a component input is used.
HDMI: Select this option to be able to watch pictures in the HDMI mode. Pressing the “ i ” button, you may visualize the resolution of the broadcast in the COMP and HDMI modes.
Note:
To connect a
Via the RCA or S-Video socket
Before making the connections, make sure first that your television and the video recorder device are turned off.
Connect one end of the Scart socket cable (not supplied with the television) to the suitable connection terminal of the video recorder device and the other end to the Scart connection point behind your television.
Turn on your television and video recorder device. If the sound is mono, use the Left Audio (L) input and select MONO from the sound settings menu.
If you would like to use your VCR by connecting it to your television at the modulator outlet with an antenna cable, select the program ‘0’ which is set for this type of connection.
ENGLISH