Grundig Vision 6 26-6840 T manual Fine tuning analogue television stations, Analogue Manual Tuning

Analogue Manual Tuning

System	BG
Current Channel	S 21
Fine Tuning	a s + 00
Search	a s
Programme No	1
Skip	Yes
Frequency	443.25 MHz
	Save
Select	Z Back
	Exit

Analogue Manual Tuning

System	BG
Current Channel	S 21
Fine Tuning	a s + 00
Search	a s
Programme No	1
Skip	Yes
Frequency	443.25 MHz
	Save
Select	Z Back
	Exit

SPECIAL SETTINGS ------------------------------------------------------------------

Tuning the analogue television channels by entering the channel numbers

1Open the menu with »i«.

– The »PICTURE« menu appears.

2Select the »CHANNEL SETUP« menu with »–« or »+«.

3Select »Analogue Manual Tuning« with »V« or »Λ« and press »●« to confirm.

4 Select the »Programme No« by pressing »V« or »Λ« and press »–« or »+« to set the preset.

5Select »Current Channel« with »V« or »Λ«.

6Press »●« to choose between »S« (special channel) or »C« (channel).

7Enter the channel number with »–« or »+« step by step or with »1…0« directly.

Note:

The current system is displayed in the »System« line. If the colour and/or sound is not functioning correctly, select »System« with

»V« or »Λ«.

Select the necessary settings with »–« or »+«.

8Press »z« (red) to finish the setting.

Note:

To set other television stations, repeat steps 4 to 8.

9Press »i« to end the setting.

Analogue Manual Tuning

System	BG
Current Channel	S 21
Fine Tuning	a s + 00
Search	a s
Programme No	1
Skip	Yes
Frequency	443.25 MHz
	Save
Select	Z Back
	Exit

Fine tuning analogue television stations

The television automatically tunes itself to the best possible recep- tion. You may need to fine tune it manually in areas where the re- ception is poor.

1Select stations with »1 ... 0« directly or step by step with »V« or »Λ«.

2Open the menu with »i«.

– The »PICTURE« menu appears.

3Select the »CHANNEL SETUP« menu with »–« or »+«.

4Select »Analogue Manual Tuning« with »V« or »Λ« and press »●« to confirm.

5 Select »Fine Tuning« with »V« or »Λ« and set with »–« or »+«.

6Press »z« (red) to finish the setting.

7Press »i« to end the setting.

46