Grundig Vision 6 32-6840 T Tuning analogue television stations, » -« or » +« to make the setting

CHANNEL SETUP

Auto Tuning

Digital Manual Tuning

Analogue Manual Tuning

Programme Table

Signal Information

CA - Module	Not Inserted
Active Antenna Power	On
	Z Back
Select
	Exit

Searching...

●●●●●●●●●●●●●●●●

14%... 161.25 MHz ATV

ATV 1 ARD

ATV 2 ZDF

ATV 3 BR3

ATV 4 3 SAT

ZSkip Exit

SPECIAL SETTINGS ------------------------------------------------------------------

Tuning analogue television stations

This setting is only necessary if you cannot receive any digital stations and you have not carried out an analogue search during initial setup. The television station can be set directly or using the search.

Switching the television to analogue channels

1Open the »INPUT SOURCE« menu by pressing »AV«.

2Select input source »ATV« with »V« or »Λ« and press »●« to confirm.

Note:

Additional operations are explained in the following sections.

Re-tuning all analogue television channels

These settings are only necessary if you can not receive any digital stations or if you want to re-tune all analogue channels.

The analogue television stations are listed in the channel list after the digital television stations.

				Note:
				Plug the rooftop antenna cable (for analogue television stations)
				into the »ANT IN« socket on the television.
		1		Open the menu with »i«.
				– The »PICTURE« menu appears.
s		2		Select the »CHANNEL SETUP« menu with »–« or »+«.
s	1
s
s			3	Select »Auto Tuning« with »V« or »Λ« and confirm with »●«.
s
		4		Select »Country Selection« by pressing »V« or »Λ« and press
				»–« or »+« to make the setting.

5Select the »Scan Type« with »V«.

Press »–« or »+« to select the »ATV« display and start the search with »●«.

–The »Searching...« menu appears, and the search for analogue TV stations begins. This may take several minutes depending on the number of television stations received.

–The search is ended when the »Programme Table« appears.

Note:

You can stop the search by pressing »i«.

6Press »i« to end the setting.

ENGLISH

45