Manual tuning
1.Switch on your radio by pressing the Power button.
2.To select the required waveband repeatedly press the Band button. The earphone lead should be extended as much as possible to increase reception. For MW (AM) reception there is a built in ferrite aerial. Rotate your radio to the position giving best reception.
3.A single press on either the Tuning Up or Down buttons will change the frequency in the following increments.
FM 50kHz
MW (AM) 9kHz - 10kHz
4.Adjust the Volume control to the required setting.
5.When the waveband end is reached your radio will continue tuning from the opposite waveband end.
6.To switch off your radio press the Power button.
15