Memorising the Channels (continued)
Setting Auto Fine Tune (AFT)
1 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page.
2 Press CH
repeatedly to select auto fine tune item.
3 Press VOL+/- to select on or off.
When the AFT is set to On, the unit will automatically tune the program frequency to provide the best possible picture and sound.
search |
|
autoset | <select> to enable |
auto fine tune |
|
fine tune | 50 |
channel skip |
|
manual search <select> to enable | |
right/left to adjust automatic fine tune | |
Manual Fine Tuning
1 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page.
2 Press CH
repeatedly to select fine tune item.
3 Press VOL+/- to fine tune till the best possible picture and sound are obtained.
If you fine tune a program manually, the auto fine tune item will be turned to off automatically.
search |
|
|
autoset | <select> to enable | on |
auto fine tune | off | |
fine tune | off | 50 |
channel skip | on | |
manual search <select> to enable | ||
right/left to adjust fine tuning |
| |
Adding and Erasing Channels
1 Use number buttons to directly select a channel that will be added or erased.
2 Repeat steps 1~4 in [Storing Channels in Memory Automatically] to display search menu page.
3 Press CH 
repeatedly to select channel skip item.
4 Press VOL+/- to select on or off.
When the item is set to on, the selected channel will be erased. When the item is set to off, the selected channel will be added. The erased channels can not be selected by using the CH
buttons unless you use number buttons to input channel number directly.
search |
|
|
autoset | <select> to enable | on |
auto fine tune | off | |
fine tune | off | 50 |
channel skip | on | |
manual search <select> to enable | ||
right/left to set channel skip |
| |
20
