Palsonic PDP 5000 owner manual Select input source signal

Basic Operations (continued)

Select input source signal

1 Press the SOURCE button to access source menu.

2 Press VOL+ or VOL- to select a desired input channel.

3 Press ENTER to confirm and the unit display signal from the selected input channel.

source

A D H1 H2 C1 C2 AV TV

VGA

A--------	VGA, select signal from VGA (5-pin D-sub) terminals.
D--------	DVI, select signal from DVI terminals.
H1------	YPbPr1, select signal from YPbPr1 terminals.
H2------	YPbPr2, select signal from YPbPr2 terminals.
C1------	YCbCr1, select signal from YCbCr1 terminals.
C2------	YCbCr2, select signal from YCbCr2 terminals.
AV------	VIDEO (S-VIDEO), select signal from S-Video or Video terminal.
	The S-Video is prior to Video terminal when they are connected at the same time.
TV------	Select TV signal.

22