Setting Picture

Customising the Picture

1 Press MENU to display the menu main page.

If the picture menu does not display, press VOL+/- repeatedly to display picture menu page.

2 Press CH to select the item you wish to change.

3 Press VOL+/- to adjust the value of the item.

4 Press MENU to exit.

Note:

The tint function is for NTSC only.

picture

 

brightness

50

contrast

50

sharpness

50

colour

50

tint

12

down for picture settings for current window

 

Using the Preset Picture Mode

1 Press P.M to display picture mode select menu.

2 Press VOL+/- to select a desired picture mode.

3 Press MENU to exit.

There are three preset picture modes (Normal, Bright and Soft) and one user-set picture mode (User).

Each preset mode has its own picture settings. Normal: Select for a normal picture.

Bright: Select for a bright picture.

Soft: Select for a fine/soft picture. Adjusted settings are stored in User mode.

Picture mode

Normal

menu to return

right/left to adjust

 

 

24

Page 25
Image 25
Palsonic PDP 5000 Setting Picture, Customising the Picture, Using the Preset Picture Mode, Picture mode, Menu to return