Palsonic PDP 5000 owner manual Connections, Connect a VCR, How to connect, To play VCR

Connections

Cautions before connecting

Carefully check the terminals for position and type before making any connections. The illustration of the external equipment may be different depending on your model.

Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals.

Refer to the operating manual of the external device as well.

When connecting an external device, turn the power off on the panel to avoid any issues.

Connect a VCR

CONTROLDVI

D-SUB

COMPONENT INPUT 1 COMPONENT INPUT 2

HEADPHONE

AV OUTPUT

AV INPUT

RF

SVHS

BOTTOM VIEW

Yellow (VIDEO)			or
White (AUDIO L)	Video	Audio	S-video
Red (AUDIO R)
	cable	cable	cable
			VCR

Rear of the VCR

How to connect:

Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the unit and VCR.

Note:

For better video, you can use the S-video terminal source supports it. When you use S-video terminal, the source menu displays SV instead of AV. The S-Video is prior to Video terminal when they are connected at the same time.

To play VCR

1.Turn on your PDP TV, press SOURCEbutton on the remote control.

2.Press VOL+/- to select AV (VIDEO) and press ENTER to confirm.

3.Turn on your VCR, insert a videotape and press the Play button.

source

A D H1 H2 C1 C2 AV TV

VIDEO

12