Installation
Recirculation mode
If site conditions are not suitable for the hood to be used for air extraction, the appliance must be converted for recirculation using the following installation kit. It can be ordered from your Miele dealer or the Technical Service Dept.
It contains a 6" (150 mm) diameter hose, a grille and a hose clamp to secure the hose at the exhaust connection of the hood.
DA 2280 installation needs one installation kit and two active charcoal filters
DA 2210 installation needs
two installation kits and four active charcoal filters
A
^Install the installation kit according to the installation situation.
When installing the recirculation vents make sure that the slats point towards the center of the room and not to a wall or the ceiling.
^Install the active charcoal filters (see "Cleaning and Care") and reprogram the charcoal filter timer.
30
