Miele DA2210, DA2280 installation instructions Installation, Non-returnflap

Installation

Non-return flap Installation

The hood comes equipped with a non-return flap. This flap automatically closes when the hood is turned off so that no exchange of outside air and room air can occur.

Uninstall the non-return flap when your exhaust system is equipped with a non-return flap or if the hood is used in recirculation mode.

^Holding the non-return flap at the wire, pull it out of the bracket.

The DA 2280 is equipped with one, the DA 2210 with two non-return flaps.

The hood is designed to be installed within cabinetry and kitchen islands.

The top half (motor and fan assembly) should be accessible after installation.

If the motor and fan assembly are not accessible, assemble the ductwork and the electrical connection before the installation.

^Insert and align the hood from the bottom up in the cut out.

^Secure the hood through the frame with the screws (3.5 x 16 mm).

28