Installation
Installing the joystick | Joystick extension | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
^Insert the lower half of the desired joystick into the socket, loosely secure it in place with the included screw and spring washer.
The screws have different lengths. Make sure the respective screw for the desired joystick is used.
^Turn the printed part of the joystick so that the
^Tighten the screw with an allen wrench. At the same time hold the joystick with a wrench.
The joystick can be extended for an easier reach.
^Place a spring washer between the joystick base and the extension. Tighten the extension by hand while holding the joystick base with a wrench.
^Attach the lower part of the joystick to the extension with a spring washer. Turn the
31
