12
TROUBLESHOOTING – continued
Symptom | Cause | Solution | |
|
|
| |
No detergent. | Detergent is too thick. | Dilute detergent. | |
|
|
| |
| Quattro nozzle is in high pressure | Turn quattro nozzle tip to low | |
| position. | pressure position. | |
|
|
| |
| Discharge nozzle is obstructed. | Blow out or remove debris with a | |
|
| fine needle. | |
|
|
| |
Quattro nozzle leaks. | Quattro nozzle not properly | Insert the quattro nozzle into the | |
| attached. | trigger gun. Carefully press in | |
|
| against the spring tension and | |
|
| twist into the locked position. | |
|
|
| |
| Broken | Call Customer Service. | |
|
|
| |
Pump is noisy. | Pump is sucking air. | Check that hoses and fittings are | |
|
| air tight. Turn off machine and | |
|
| purge pump by squeezing trigger | |
|
| gun until a steady flow of water | |
|
| emerges through the nozzle. | |
|
|
| |
Water leaks from pump | Loose fittings. | Check that all fittings are tight. | |
(up to 10 drops per |
|
| |
minute is permissible). |
|
| |
Water seals are damaged or worn. | Call Customer Service. | ||
| |||
|
|
| |
Oil Drips. | Oil seals are damaged or worn. | Call Customer Service. | |
|
|
|
If you encounter any additional difficulties not listed, please call our Customer Service at
