OPERATING INSTRUCTIONS
Step 1
Connect the high pressure hose to the high pressure outlet.
Step 2
Insert the spray wand. Press in against the spring tension and twist into the locked position.
5
Step 3
Connect the garden hose to the water inlet.
Step 5
Plug the power cord into the power outlet. Trigger the gun to eliminate trapped air, wait for a steady flow of water to emerge from the spray nozzle.
Step 4
Connect garden hose to the cold water source and turn water on completely.
Step 6 Turn on the pressure washer (I).
NOTE: This unit is equipped with a pressure switch. The motor only starts up when the trigger on the gun is pulled. The motor shuts off when the trigger is released.
