Brightness button [
]
Enter button [
] / SOURCE button
AUTO button
PIP button
Power button [
]
Power Indicator
provides a sharp image.
3) Movie
Select this mode when the surroundings are dark. This will save power and reduce eye fatigue.
4) Custom
Select this mode when you want to adjust the image according to your preferences.
>>Click here to see an animation clip
( Available in Analog Mode Only )
When OSD is not on the screen, push the button to adjust brightness.
>>Click here to see an animation clip
Activates a highlighted menu item. /
Push the 'SOURCE', then selects the video signal while the OSD is off. (When the SOURCE button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode
Note : Changing the source is allowed only in external devices that are connected to the monitor at the time.
(Available in Analog mode only)
When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center.
Auto adjustment allows the monitor to
>>Click here to see an animation clip
( Available in Analog/Digital(PC) Mode Only )
In Analog or Digital Mode, turns on Video screens in PIP Mode. Use this button for turn the monitor on and off.
This will enable you to see the overall power status of the system. For more information, see the PowerSaver section.
See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
