I N I T I A L S E T U P 17
CHANNEL SUMMARY
You can add or delete channels from channel scanning. You can also lock out any “unauthorized” viewers from one or up to all 125 channels.
CHANNEL GUARD - LOCK
To CHANNEL SUMMARY
To operate
NOTES:
Initial Setup Menu items:
Press the MENU Button
To CHANNEL SUMMARY
To operate
Note: Noise Muting will not work while you are in the Channel Summary menu.
CH NO. | SCAN |
01
02√
03√
04√
05√
CH NO. SCAN
06√
07
08
09√
10√
•Auto Tuner Setup, and
•Language are described in detail in the Plug In Menu section
In the Channel
Summary:
SCAN
You can manually set channels to scan that were too weak to be picked up during Auto Tuner Setup. Conversely, if a channel was too weak to receive a good picture but was picked up anyway, delete it by removing the √. (If you have not performed the Auto Tuner Setup described on page 15, do so now.)
To the Lock column
The access code zero (0) to lock or unlock that channel
Use the CHANNEL
other channel you want to lock
EXIT when finished
CHANNEL GUARD MESSAGE:
This message appears when a viewer
To move up and down a column (e.g. from channel to channel) use the
To move from item to item (e.g. from channel number to scan to lock) use the MENU UP/DOWN buttons.
CH NO. | SCAN |
01
02√
03√
04√
05√
CH NO. SCAN
06√
07
08
09√
10√
attempts to watch a guarded channel :
THIS CHANNEL IS LOCKED BY CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.
NO. – – – –
CHANNEL
To the SCAN column
To include or delete from scan
EXIT when finished
Note: Channels set to scan will be marked with an √.
Note: Some cable systems experience interference from radio frequencies on Cable Channel 95. If you like, you can delete this channel from scanning by removing the √.
To watch a channel you have locked, enter the lock code using the 10 key pad. If the wrong lock code is entered, this message will appear:
INVALID LOCK CODE !
Note: See "Set Lock Code", for more information.
Continued above…