Setting up your TV
CAUTION | Fig.A |
•Turn off all the epuipment including the TV before connecting anything.
1 Connecting the aerial and VCR
•Aerial cable is not supplied. Use a good quality
•Read the manual that came with the VCR before connecting.
If not connecting a VCR (see fig.A) : Connect an aerial cable to the aerial socket on this TV .
If connecting a VCR (see fig.B) :
1Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable.
2Connect the VCR's VIDEO OUT (video
output) jack and the TV's VIDEO jack with | Fig.B | |
a video cable. | ||
|
To connect a VCR to the TV with an
3Connect the VCR's VIDEO OUT (audio L/R output) jacks and the TV's AUDIO jacks (L/ MONO and R) with an audio cable.
•If the VCR's audio output is in mono, connect the VCR's AUDIO OUT (audio output) jack and the TV's AUDIO L/MONO jack with an audio cable.
•You can use the AV COMPU LINK function if your VCR has an AV COMPU LINK terminal. For details, see “Connecting AV COMPU LINK Supported Devices” on page 29.
2 Connecting the power cord
Connect the mains plug to the AC outlet.
3Putting the batteries into the Remote control
Use two AA/R6 batteries.
Insert the batteries from the 
end, making sure the 
and 
polaritiles are correct.
•Follow the warnings printed on the batteries.
•If the remote control does not work properly, replace the batteries.
•The batteries we supply are only for setting up and testing your TV. Please replace them as soon as necessary.
Back of the TV
AUDIO | VIDEO | S | |
R | L/MONO | ||
|
| OVER |
|
|
|
| |
|
|
| |
CR | CB | Y/VIDEO |
|
AUDIO |
| ||
R | L/MONO | COMPONENT | |
OUTPUT
R L VIDEO
AUDIO
AV COMPU LINK
Back of the TV
A | AUDIO | VIDEO | S | ||
R | L/MONO | ||||
|
|
| OVER |
| |
|
|
|
|
| |
|
|
|
|
| |
| CR | CB |
| Y/VIDEO |
|
| AUDIO |
|
| ||
| R | L/MONO |
| COMPONENT | |
OUTPUT
R L VIDEO
AUDIO
AV COMPU LINK
4