PREPARATION FOR USE
INSTALLING THE BATTERIES
1)Slide the battery compartment cover on the remote unit.
2)Insert 2 "AA" penlight batteries into battery compartment in the direction as indicated by the polarity (+ /
3)Replace the cover.
[ADD/DELETE FUNCTION]
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4)Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
PICTURE 
CHANNEL SET [ENGLISH]FRANÇAIS
ADD/DELETE
AUTO MEMO
STEREO [ON]
LANGUAGE SELECTION
If you want to change the language of the
1) | Connect the power cord to a standard AC outlet. |
Note: If some digits appear in the corner of the screen, | |
press the POWER button without unplugging the power cord. | |
2) | Press the POWER button to turn on the TV. |
3) | Press the MENU button so that the menu display appears |
PICTURE CHANNEL SET [ENGLISH]FRANÇAIS
Note: The display will return to the screen in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
| on the TV screen. |
4) | Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]". |
5) | Select "ENGLISH" or "FRANÇAIS" = French by using |
| the VOL(ume) ▲ or ▼ button. |
6) | Press the MENU button to exit the menu. |
PICTURE CHANNEL SET 
[ENGLISH]FRANÇAIS
STEREO SOUND SYSTEM
This function is suppresses noise, restores the dynamic range and electroni- cally expands the stereo signal to create a more spacious sound effect.
1) Press the MENU button so that the menu display appears on the TV |
PICTURE CHANNEL SET [ENGLISH]FRANÇAIS
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure
below.
1) Press the POWER button to turn on the TV. 2) Press the MENU button so that the menu display appears
on the TV screen.
3)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO". Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
screen. |
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". |
Then, press the VOL(ume) ▲ button. |
3) Press the CH(annel) ▲ or ▼ button so that "STEREO" is selected. |
4) Press the VOL(ume) ▲ or ▼ button to select the stereo mode on or off. |
Stereo sound is effective when the "STEREO" is on. |
ADD/DELETE
AUTO MEMO
STEREO [OFF]
CAPTION [OFF]
PICTURE 
CHANNEL SET [ENGLISH]FRANÇAIS
ADD/DELETE
AUTO MEMO
STEREO [ON]
●The TV distinguishes between standard TV channels and cable channels.
●When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.
●When you press the CH(annel) ▲ or ▼ button after selecting AUTO MEMO, the tuner will stop at the memorized channels only.
●The TV may recognize TV channels to be CATV channels by the receiving conditions. In this case, try AUTO MEMO action again in the fine receiving conditions.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.
OPERATIONS
WATCHING A TV PROGRAM | PICTURE ADJUSTMENT |
1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▲ or ▼ button.
3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.
1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .
2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer is set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will be displayed on the screen when you press the SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.
GAME MODE
Set to the most suitable position for TV GAME.
[+]: ON [ - ] : OFF
BRIGHT
Adjust until the darkest parts of the picture are as bright as you prefer.
[+] : increase brightness
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast | |
COLOR |
|
Adjust to be brilliant or pale color. | |
[+] : be brilliant color | [ - ] : be pale color |
automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ▲ button so that "PIC- TURE" is selected. Then, press the CH(annel) ▲ or ▼ button repeatedly until the display returns to the screen.
●If you adjust any picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
: Press the VOL(ume) ▲ or ▼ button.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".
3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.
4)When done, press the MENU button to exit the menu.
TINT |
Adjust to obtain natural skin tones. |
[+] : greenish tone [ - ] : reddish tone |
SHARPNESS |
Adjust to detail in the picture. |
[+]:increase sharpness |
Notes:
● | “+” is achieved by pressing the VOL(ume) |
▲ button and | |
▼ button. | |
● | In the above steps, the picture adjustment |
| display will disappear from the TV screen |
●To exit the Game mode and external input mode, press the GAME button on the remote control again.
●To cancel the Game mode only, adjust the picture control. In this case, “VIDEO” instead of “GAME” appears on the TV screen.
●If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode auto- matically.
PICTURE | PICTURE | PICTURE | PICTURE | PICTURE |
CHANNEL SET | CHANNEL SET | CHANNEL SET | CHANNEL SET | CHANNEL SET |
[ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS | [ENGLISH]FRANÇAIS |
CAPTION [OFF] | CAPTION [ C1] | CAPTION [ C2] | CAPTION [ T1] | CAPTION [ T2] |
: Press the CH(annel) ▲ or ▼ button.
GAME MODE [+] | BRIGHT | [+] | COLOR | [+] | TINT | [+] | ||||||||||||
OFF | ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|