CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio connections.
or wide screen TV
or To | To | |||||||
|
|
|
|
|
|
|
|
|
|
| To VIDEO INPUT jack | To VIDEO OUT jack |
|
| |||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Amplifier equipped with digital
COAXIAL | R | L | VIDEO | Y | Pb/Cb Pr/Cr | |
DIGITAL AUDIO OUT | AUDIO OUT | OUT | OUT | CPMPONENT VIDEO OUT | ||
input jacks, MD deck, DAT deck, etc.
To COAXIAL DIGITAL AUDIO INPUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
[Fig. 4]
CONNECTING TO A TV OR A STEREO TV THAT HAS
COMPONENT VIDEO IN JACKS
Set Dolby Digital and DTS to OFF on the DVD Player. If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.
or wide screen TV
To COMPONENT VIDEO
INPUT jackTo COMPONENT VIDEO OUT jack
Amplifier equipped with digital
input jacks, MD deck, DAT deck, etc.
COAXIAL | R | L | VIDEO | Y | Pb/Cb Pr/Cr | |
DIGITAL AUDIO OUT | AUDIO OUT | OUT | OUT | CPMPONENT VIDEO OUT | ||
To Right (red) and Left (white)
AUDIO OUT jacks
Notes
To ANALOG AUDIO INPUT jacks
[Fig. 5]
¡The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.
¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s
– 11 – | EN |
9F21