![](/images/new-backgrounds/1278046/27804629x1.webp)
B DISPLAY Setting
You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4 | Select the desired item. | 5 |
|
| TV ASPECT: QUICK | |
|
| (Default: 4:3 LETTER BOX) | |
or |
| See Hint to the right. | |
|
| TV ASPECT | 4:3 LETTERBOX |
DISPLAY menu |
| STILL MODE | AUTO |
|
|
| |
|
|
| ENTER |
DISPLAY |
|
|
|
TV ASPECT | 4:3 LETTER BOX | STILL MODE: |
|
STILL MODE | AUTO |
| |
|
| (Default: AUTO) |
|
ENTER |
| See Hint to the right. | |
|
|
TV ASPECT | 4:3 LETTERBOX |
STILL MODE | AUTO |
ENTER
Select the desired setting.
TV ASPECT | ENTER |
4:3 LETTER BOX | or |
4:3 PAN & SCAN |
|
16:9 WIDE |
|
Select the desired setting.
STILL MODE | ENTER | |
AUTO | or | |
FIELD | ||
| ||
FRAME |
|
6To exit the menu
SETUP
Hint
TV ASPECT:
•Select “4:3 LETTER BOX”, so that black bars may appear on the top and bottom of the screen.
•Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.
•Select “16:9 WIDE” if a
STILL MODE:
•Select “AUTO” usually.
•If you select AUTO, auto- matically select the best resolution setting (FRAME or FIELD) based on the datacharac- teristics of the pictures. (default).
•If you select “FIELD”, the picture in the still mode will be stabilized.
•If you select “FRAME”, the picture in the still mode will be highly defined.
•An individual picture on TV screen is called as “frame”, which consists of two separate images called as “field”.
Some pictures may be blurred at the AUTO set- ting instill mode due to their data characteristics.
Functions
C AUDIO Setting
Choose the appropriate audio settings for your equipments. It only affects during the playback of DVD discs. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.
4 Select the desired item. | |
or |
|
AUDIO menu |
|
AUDIO |
|
DRC | ON |
DOWN SAMPLING | ON |
DOLBY DIGITAL | BITSTREAM |
ENTER |
|
5
DRC (Dynamic Range Control):
(Default: ON)
Set to “ON” to compress the range between soft and loud sounds.
DRC | ON | OFF |
DOWN SAMPLING | ON | ON |
DOLBY DIGITAL | BITSTREAM ENTER | BITSTREAM |
DOWN SAMPLING: (Default: ON)
Set to “ON” when outputting in 48 kHz.
Set to “OFF” when outputting the original sound.
DRC | ON | ON |
DOWN SAMPLING | ON | OFF |
DOLBY DIGITAL | BITSTREAM | BITSTREAM |
ENTER
DOLBY DIGITAL: QUICK
(Default: BITSTREAM)
Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.
•BITSTREAM: Outputs a Dolby Digital Signals.
•PCM: Convert the Dolby Digital into PCM (2 channel).
DRC | ON | ON |
DOWN SAMPLING | ON | ON |
DOLBY DIGITAL | BITSTREAM | PCM |
ENTER
6To exit the menu
SETUP
Hint
DRC:
•This function is available only on the discs which are recorded in the Dolby Digital format.
DOWN SAMPLING:
•When playing disc with copyright protection, the sound will be down sam- pled at 48kHz, even if you set to OFF.
•This function is available only on digital outputting of a disc recorded in 96kHz.
– 15 – | EN |