Sylvania DVL505 owner manual Information Troubleshooting Guide, Problem Solution

1

2

3

SETUP

or

STOP

or

ENTER

<SETUP MENU>

Select “INITIALIZE”.

Select “YES”.

INITIALIZE

QUICK SETUP

QUICK SETUP

Initialize?

PLAYER MENU

ENGLISH

PLAYER MENU

ENGLISH

NO

TV ASPECT

4:3 LETTER BOX

TV ASPECT

4:3 LETTER BOX

DOLBY DIGITAL

BITSTREAM

YES

DOLBY DIGITAL

BITSTREAM

ENTER

Problem

Solution

No power

–Check if the AC power cord is properly connected.

–Unplug the outlet once, and wait for 5-10seconds and then plug it in again.

No sound or picture

–Check if the TV is switched on.

–Check the video connection.

–Check the VIDEO/AUDIO cable connections to the TV.

(See Connection to a TV)

Distorted picture

–Sometimes a small amount of picture distortion may appear.

This is not a malfunction.

–Connect the unit directly to the TV.

Completely distorted picture or

–Connect the unit directly to the TV.

black/white picture with DVD

–Make sure the disc is compatible with the unit.

No sound or distorted sound

–Adjust the volume.

–Check that the speakers are connected correctly.

No audio at digital output

–Check the digital connections.

–Check if the audio format of the selected audio language matches

your receiver capabilities.

No DTS audio is output

–This unit does not support DTS audio.

This is not a malfunction.

Picture freezes momentarily

–Check the disc for fingerprints/scratches and

during playback

clean with a soft cloth wiping from center to edge.

–Clean the disc.

Disc can’t be played

–Clean the disc.

–Ensure the disc label is facing up.

–Check if the disc is defective by trying another disc.

–Cancel the parental lock or change the control level.

–Insert a correct disc that plays on this unit.

–Handle a disc with special care so that it does not have fingerprints,

scratches, or dusts on its surface.

No return to start-up screen when

–Reset the unit by switching the unit off, then on again.

disc is removed

The unit does not respond to

–Aim the remote control directly at the sensor on the front of the unit.

the remote control

–Reduce the distance to the unit.

–Replace the batteries in the remote control.

–Re-insert the batteries with their polarities (+/– signs) as indicated.

–Tune your radio to an empty AM station so that you hear a lot of noises.

Then, turn the volume up. If you hear some signal sound from the radio

by pressing buttons on the remote control, the remote control is working.

Buttons do not work or the unit stops

–To completely reset the unit, unplug the AC

responding

cord from the AC outlet for 5-10 seconds.

The unit does not respond to some

–Operations may not be permitted by the disc.

operating commands during playback

Refer to the instructions of the disc.

The unit cannot read

–Use a commonly available cleaning CD/DVD to

CDs/DVDs

clean the lens before sending the unit for repair.

Angle does not switch

–The angle cannot be switched for DVDs which do not contain multi-

ple angles. In some cases multiple angles are only recorded for

specific scenes.

Playback does not start when the title is selected

–Check the “PARENTAL” setting.

The password for rating level has been forgotten

–Enter the default password “4737”, then your forgotten password

will be cleared.

Disc cannot be inserted

–Check if any disc is already in?

Disc cannot be taken out

–Press and hold [EJECT A] on the unit for more than 5 seconds.