CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, DTS surround format, the DVD player outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and
Use an audio coaxial digital cables (not included) for the audio connections.
or wide screen TV
To | To |
or |
|
|
|
To VIDEO | To VIDEO OUT jack | Y | Cr |
INPUT jack | R | L |
|
Center
speaker
Front speaker (left)
Dolby Digital,
DTS decoder
Surround
speaker (left)
Notes
COAXIAL AUDIO OUT VIDEO Cb
OUTOUT
Front speaker |
|
(right) | To COAXIAL DIGITAL |
| |
| AUDIO OUT jack |
To COAXIAL DIGITAL
AUDIO INPUT jack
Surround | Subwoofer |
speaker |
|
(right) |
|
[Fig. 4]
¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.
¡If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio out- put in the setup mode.
¡If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out- put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems Inc.
Manufactured under license from Dolby Laboratories. “Dolby” and the
CONNECTING TO A TV OR A STEREO TV THAT HAS
COMPONENT VIDEO IN JACKS
or wide screen TV
To COMPONENT VIDEO INPUT jack
To COMPONENT VIDEO OUT jack
Y | Cr |
|
R L |
|
|
COAXIAL AUDIO OUT VIDEO | Cb |
|
OUT | OUT |
|
Stereo system |
|
|
To Right (red) and Left (white) |
| |
AUDIO OUT jacks |
| |
To ANALOG AUDIO INPUT jacks | [Fig. 5] | |
– 11 – |
| EN |
2A10