STARTING FROM A DESIRED
TIME COUNT
DVD 
CD
1Press the SEARCH MODE button twice.
2Press the numeric buttons to set the desired time count.
RANDOM (Audio CD)
CD
1Press the MODE button in stop mode.
¡The program setting menu screen will appear.
2Press the MODE button again.
¡Example: 1 hour, 23 minutes and 30 seconds
1 → 2 → 3 → 3 → 0
Notes
TIME 1:23:30 TOTAL 1:29:00
RANDOM
START : PLAY EXIT : MODE
¡In the case of DVD, Time Search in Title is effec- tive. (But Time Search in Chapter is ineffective.)
¡In the case of CD, Time Search in Track is effective. (But Time Search in the entire disc is ineffective.)
¡Playback from a desired time count is not available with some discs or if the unit is in stop mode.
¡If wrong numbers are entered, press the CLEAR button and
MARKER
DVD 
CD
You can define the part to be called back.
1Press the SEARCH MODE button three times during playback.
Set the marker
¡Using the cursor (s / B) button, position the cursor on to the marker number shown as “NOT SET”. Press the ENTER button when the screen to be reviewed appears. The marked
time will be displayed. Up to 5 points can be marked.
Call back the marker
¡Using the cursor (s / B) button, position the cursor on to the marker number to be called back and press the ENTER button.
Clear the marker
¡Using the cursor (s / B) button, position the cursor on to the marker number to be cleared and press the CLEAR button.
To clear all markers, place the cursor on “AC” (All clear markers) and press the ENTER button.
2Press the SEARCH MODE button or the RETURN button to exit the display.
3Press the PLAY button. Random playback will then start.
Note
¡Program playback is not available during random playback.
– 16 – | EN |
2A10