Sylvania DVL100C owner manual Connecting to a Dolby Digital Decoder or DTS Decoder

CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER

If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround, DTS surround format, the DVD player outputs a Dolby Digital, or DTS data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard such as can be heard in movie the- aters.

Use an audio coaxial digital cables (not included) for the audio connections.

COAXIAL AUDIO OUT VIDEO Cb S-VIDEO

OUTOUT

¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.

¡If output Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio out- put in the setup mode.

¡If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.

¡Unless connected to a Dolby Digital decoder, or a DTS decoder, set Dolby Digital or DTS to off for audio out- put in the setup mode. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

CONNECTING TO A TV OR A STEREO TV THAT HAS

COMPONENT VIDEO IN JACKS

Stereo system

To Right (red) and Left (white) AUDIO OUT jacks

[Fig. 5]

To ANALOG AUDIO INPUT jacks

1L25