Sylvania DVL1000G owner manual Display Setting, To complete Progressive setting

B DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.

4Select the desired item. 5

ENTER

DISPLAY menu

	DISPLAY
	TV ASPECT	4:3 LETTER BOX
	STILL MODE	AUTO
	PROGRESSIVE	OFF
	PROGRESSIVE MODE	AUTO1
ENTER	FORMAT	RGB
	RGB RANGE	NORMAL

TV ASPECT: QUICK

(Default: 4:3 LETTER BOX)

See Hint on the right.

TV ASPECT	4:3 LETTERBOX		TV ASPECT
			4:3 LETTER BOX
STILL MODE	AUTO
			4:3 PAN & SCAN
PROGRESSIVE	OFF
			16:9 WIDE
PROGRESSIVE MODE	AUTO 1
			16:9 SQUEEZE
FORMAT	RGB
RGB RANGE	NORMAL
		ENTER

STILL MODE:

(Default: AUTO) See Hint on the right.

TV ASPECT	4:3 LETTERBOX		STILL MODE
			AUTO
STILL MODE	AUTO		FIELD
PROGRESSIVE	OFF		FRAME
PROGRESSIVE MODE	AUTO 1
FORMAT	RGB
		ENTER
RGB RANGE	NORMAL

Select the	ENTER
desired
setting.
ENTER

Select the

desired ENTER setting.

ENTER

6To exit the menu

SETUP

Hint

TV ASPECT:

•Select “4:3 LETTER BOX”, so that black bars may appear on the top and bottom of the screen.

•Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide- screen TV is connected to this unit.

•Select “16:9 SQUEEZE” when the TV screen is too large horizontally at “16:9 WIDE” setting and when it is possible to adjust the screen size using the TV’s controls.

STILL MODE:

Functions

PROGRESSIVE MODE: (Default: AUTO1)

See Hint on the right.

TV ASPECT	4:3 LETTERBOX	PROGRESSIVE MODE
		AUTO1
STILL MODE	AUTO
		AUTO2
PROGRESSIVE	OFF
		VIDEO
PROGRESSIVE MODE	AUTO 1
FORMAT	RGB
RGB RANGE	NORMAL

ENTER

FORMAT: (Default: RGB)

See Hint on the right.

TV ASPECT	4:3 LETTERBOX	4:3 LETTERBOX
STILL MODE	AUTO	AUTO
PROGRESSIVE	OFF	OFF
PROGRESSIVE MODE	AUTO 1	AUTO1
FORMAT	RGB	YCbCr
RGB RANGE	NORMAL	NORMAL

ENTER

Select the desired setting.

ENTER

ENTER

•Select “AUTO” usually.

•If you select “AUTO”, automati- cally select the best resolution setting (FRAME or FIELD) based on the data characteristics of the pictures. (default)

•If you select “FIELD”, the picture in the still mode will be stabilized.

•If you select “FRAME”, the picture in the still mode will be highly defined.

•An individual picture on TV screen is called a “frame”, which consists of two separate images called as “field”.

Some pictures may be blurred at the “AUTO” setting in the still mode due to their data characteristics.

PROGRESSIVE MODE:

• You can select a mode below for

the progressive scan output.

• AUTO1: mode suitable for

images on the film mate-

rial.

RGB RANGE: (Default: NORMAL) See Hint on the right.

TV ASPECT	4:3 LETTERBOX
STILL MODE	AUTO
PROGRESSIVE	OFF
PROGRESSIVE MODE	AUTO 1
FORMAT	RGB
RGB RANGE	NORMAL

ENTER

4:3 LETTERBOX AUTO

OFF

AUTO1

RGB ENHANCED

• AUTO2: mode for images on the

material of 30-frame

film.

• VIDEO: mode for video material.

FORMAT:

• Select an HDMI output mode

between “YCbCr” and “RGB”.

• When the connected equipment

is not compatible with YCbCr,

HDMI signal is output as RGB

regardless of the setting.

• This setting is effective only when

you use the HDMI connection.

5 PROGRESSIVE: QUICK

(Default: OFF)

See Hint on the right.

TV ASPECT	4:3 LETTERBOX
STILL MODE	AUTO
PROGRESSIVE	OFF
PROGRESSIVE MODE	AUTO 1
FORMAT	RGB
RGB RANGE	NORMAL	ENTER

If “PROGRESSIVE” is “ON”, this message appears:

					Select
		Before proceeding…			“YES”.
		1. Make sure your TV has progressive scan.
4:3 LETTERBOX		2. Connect with component video cable
	SETUP	NOTE: If there is no picture or picture is
AUTO		distorted after selecting “YES”,			ENTER
		wait about 15 seconds for auto recovery.
ON		Activate Progressive?		NO
AUTO 1				YES
		SELECT: K / L	SET:ENTER
RGB

NORMAL

RGB RANGE:

•Select a HDMI picture mode between “NORMAL” and “EN- HANCED”.

•Select “ENHANCED” if the black- white contrast is not clear.

•This setting is effective only for HDMI RGB output.

PROGRESSIVE:

• You can set “PROGRESSIVE”

6To complete the

PROGRESSIVE setting

ENTER

If there is no picture or you do not press any buttons for 15 seconds, Progressive Scan will switch to “OFF”.

Confirm again to use progressive scan.

If Picture is good, Select “YES”.

NO

YES

SELECT: K / L SET:ENTER

Select “YES”.

ENTER

ENTER

to “OFF” either in the DISPLAY

menu or by pressing and holding

[PLAY B] on the front of the unit

for more than 5 seconds.

• When “PROGRESSIVE” is “ON”,

video signals from VIDEO OUT

and S-VIDEO OUT jacks will be

distorted or not be output at all.

• PROGRESSIVE will not be able

to do a set change during the

HDMI output mode.

– 18 – EN