Setup
Setup
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see the section “Connection to RF Modulator” on the front page.
Connection to a TV
|
|
| Method 1 | Method 2 | Method 3 |
|
TV | Basic Audio | Good picture | Better picture | Best picture |
| |
|
| |||||
|
|
|
|
|
| COMPONENT |
|
|
|
|
|
| VIDEO IN |
| AUDIO IN | VIDEO IN | Y | Y | ||
| L | R |
|
| ||
|
|
|
|
| ||
|
|
|
|
| PB | CB |
|
|
|
|
| or |
|
|
|
|
|
| PR | CR |
| Audio cable |
| Video cable | Component Video cable | ||
| (supplied) |
| (supplied) | (commercially | (commercially available) | |
|
|
|
| available) |
|
|
This unit
| L |
|
|
|
|
|
| R |
|
| Y | CR/PR | COMPONENT VIDEO OUT |
L |
|
|
|
|
| |
R |
|
|
|
|
|
|
AUDIO | B |
|
|
|
|
|
OUT |
|
| VIDEO |
|
| |
| AUDIO | VIDEO | CB/PB |
| ||
| OUT |
| ||||
|
|
| ||||
|
|
|
| |||
| OUT | OUT | OUT |
|
|
|
AUDIO OUT | VIDEO OUT | COMPONENT VIDEO OUT | |
(Analog) |
|
|
|
Hint
•Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.
If your TV is compatible with 525p (480p) progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set “PROGRESSIVE” to “ON” in the DISPLAY menu, so that the “P. SCAN” on the front panel display appears. See pages
•When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in the DISPLAY menu or by pressing and holding [PLAY B] on the front of the unit for more than 5 seconds, so that the “P. SCAN” on the front panel display disappears.
After you have completed connections;
Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input channel (usually near channel 0) for viewing the picture from this unit. If the picture does not appear, also refer to the manual accompanying your TV.
INPUT MODES FOR COMMON TV BRANDS
Listed below are inputs for common brand name TV’s.
Admiral: | AUX | Panasonic: | TV/VIDEO |
Curtis Mathis: | LINE1, LINE2, 00, 90, 91, 92, 93 | RCA: | INPUT, TV/VCR, 00, 90, 91, 92, 93 |
GE: | INPUT, TV/VCR, 00, 90, 91, 92, 93 | Samsung: | TV/VIDEO |
Hitachi: | INPUT, AUX | Sanyo: | VIDEO |
JVC: | VIDEO, VIDEO1, VIDEO2, VIDEO3 | Sharp: | 00 |
Kenwood: | AUX | Sony: | VIDEO1, VIDEO2, VIDEO3 |
00 | Toshiba: | TV/GAME | |
Magnavox: | AUX CHANNEL | Zenith: | 00 |
|
|
|
|
– 6 – | EN |