Eiki LC-XM1 Picture Image Adjustment, Adjusting the Picture Image, Color, Tint, Sharpness

Page 31

VIDEO MODE

PICTURE IMAGE ADJUSTMENT

ADJUSTING THE PICTURE IMAGE

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT buttons to select IMAGE

 

and press the SELECT button. Another dialog box

 

PICTURE IMAGE ADJUSTMENT Menu will appear.

2

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the item that you want to adjust by

pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.

Color

Press POINT LEFT button to lighten the image, and press POINT RIGHT button to deepen the image. (From 0 to 63.)

Tint

Press POINT LEFT button to increase purple, and press POINT RIGHT button to increase green. (From 0 to 63.)

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color, and press POINT RIGHT button to deepen the color. (From 0 to 63.)

Contrast

Press POINT LEFT button to decrease contrast, and press POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to darken the image, and press POINT RIGHT button to brighten the image. (From 0 to 63.)

Sharpness

Press POINT LEFT button to soften the image, and press POINT RIGHT button to sharpen the image. (From 0 to 15.)

Gamma

Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 16.)

Each of the keys operates as follow.

Reset

Recalls the data previously adjusted.

Stored Stores the data in the memory.

Quit

Closes the PICTURE IMAGE ADJUSTMENT Menu.

 

Move the arrow to the item

Closes the PICTURE

and press POINT RIGHT /

IMAGE ADJUSTMENT

LEFT button.

Menu.

 

NORMAL FUNCTION

The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The "Normal" display will be displayed on the screen for a few seconds.

Normal

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model LC-XM1 To the Owner Voor de klanten in Nederland Safety InstructionsCompliances AC Power Cord RequirementTable of Contents Component Video Features and DesignComputers Color SystemsZoom Ring Focus Ring PreparationName of Each Part of the Projector HOT AIR ExhaustedConnecting the AC Power Cord SETTING-UP the ProjectorFor Continental Europe Preparation Positioning the Projector Adjustable FeetRoom Light Preparation Moving the Projector Pb/Cb Pr/Cr Connecting the ProjectorControl Port Connector Terminals of the ProjectorConnecting the Projector Connecting to the Video EquipmentTerminals Projector Computer Connecting to the ComputerTerminals of the Projector Control Cable for PS/2 PortBefore Operation Operation of the Remote ControlRemote Control Batteries Installation Tele TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Before Operation Menu BAR Setting MenuTurning OFF the Projector Basic OperationTurning on / OFF the Projector Turning on the ProjectorKeystone Adjustment Adjusting the ImageZoom Adjustment Focus AdjustmentSound Adjustment Selecting Computer Mode Computer ModeSelecting Computer System KHz Computer Mode Compatible Computer SpecificationsResolution FreqAdjust PC AdjustmentClamp Total linesTotal dots Horizontal / VerticalNormal Function Picture Image AdjustmentsPosition Picture Position AdjustmentComputer Mode Auto Image Function ImagePanning function Picture Screen AdjustmentExpand function Compress functionAuto Video ModeSelecting Video Mode Selecting Video SourceRegular Selecting Color SystemWide Tint Picture Image AdjustmentAdjusting the Picture Image ColorSetting Menu SettingSelecting Language Power managementLamp age Appendix Operating Wireless MouseInstallation Operating Wireless MouseCleaning the Projection Lens MaintenanceTemperature Warning Indicator AIR Filter Care and CleaningLamp Replacement Monitor Timer Appendix Lamp ReplacementLamp Assembly Lamp Cover Handle Troubleshooting Function does not Remote Control UnitWireless Mouse Does not workOptional Parts Technical SpecificationsEiki INTERNATIONAL, INC
Top Page Image Contents