Curtis Mathes CM 19033S Changing Channels, Adjusting, Volume, Using the Channel Buttons

Changing Channels

Using the Channel Buttons

Press the CH ,_, 0t CH Y butt0n t0 change channels,

When you press CH A or CH Y, tile TV changes channels in sequence. You will see all tile channels that tile TV has memorized. (The TV must have menlorized at least three channels.) You will not see channels that were either" erased or not memorized.

Directly Accessing Channels

Use the number buttons to qtfickly tune to any channel.

1

Piess the numbgr buttons to go directly to a Channel. Forexample, to select chaune127, press "2," theb " 7/'

The TV wi! change channels when yo u press the second number.

When you use tile number buttons, you can directly select channels that were either erased oi" not memorized.

To select a channel over" 100, press the +100 button. (For" channel 122, press "+100," then "2/' then "2.")

To ehanqe to single digit channels (0 9) f_/ster, press "0" beffme tile

single digit. (For eharmel "4," press "0," then "4/')

Using the PRE-CHButton to select the Previous Channel

Using Mute

At any time, you can temporarily cut off the sound using the Mute button.

Press the MUTE button and the sound cuts off.

The word" Mutei'will appear in the !0wer-left comer of the

To turn mute off, press the MUTE butten agai n, or simply Press either the VOLL or VOL+ button.

3.6 ciiAi,q._ TH]_]:: TV OP]:],u_,TIoN