Curtis Mathes CM 19033S CustomizingYour Remote Contro, Remote control has three modes TV, VCR

,_

Press the VCRbutton 0n the top right of your remote control

4

Enter bothdigits ofthe VCRcode !isted on the next page f0r #our brand 0f vc R.

Press the POWERbutton on the remote control. Your VCR should turn on, If your VCRturns on, your remote control is now Set correctly.

_ The remote control has three 'modes : 'TV, "VCR", and

"Cable".

Press the "VCR" button to switch the remote control to the "VCR" mode.

4 Makes,,re>te,,ter,,othcfi itsof

the code, even if the first digit is a "0."

If more than one code is listed, try the first one.

If your VCR does not turn on,

repeat steps 2, 3, and 4, but try one

of the other codes listed fi_r the brand of" your particular VCR.

If no other codes are listed, try each cocle, 000 through 72.

6

OnceyourremotecontroIis setup,pressthe VCRbutton any timeY0Uwantt0 usethe rem0tet0 0potatoy0urvCR.

_,4 \/Vhen your remote control is in the "VCR" mode, the volume buttons

still control your TV's volume.

When your remote is in the "TV"

mode, the VCR control buttons (PLAY,

PAUSE, etc.) will still operate your VCR.