VCR CONNECTIONS
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable (CABLES NOT INCLUDED).
VCR |
INCOMING CATV CABLE |
From V CR OUT jack |
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2.Connect a 75 ohm coaxial cable from the VCR’s 75 ohm OUT jack to the ANT jack on the rear of the TV.
3.Press the AV IN button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to watch a tape.
Follow the instructions below to connect a VCR to your television using Audio/Video cables (CABLES NOT INCLUDED).
VCR |
|
INCOMING CATV CABLE |
|
From VCR OUT jacks | To TV IN jacks |
| |
AUDIO/VIDEO Cord |
|
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2.Connect the audio cable from the VCR’s Audio OUT jack to the TV’s Audio IN jack. Connect the video cable from the VCR’s Video OUT jack to the TV’s Video IN jack.
3.Press the AV IN button until AV appears on the TV screen and press PLAY on the VCR to watch a tape.
NOTE:
Above are basic connection instructions; for detailed connection instructions for external units, refer to the external unit’s owner’s manual.
11