SETTING THE CHANNELS INTO MEMORY
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
1
1
2 
2
4
2 1
3
Language :English
Channel :2
Skip:Off
ReceptionAir
Memorize Channels
Select | Adjust | Exit |
Press the Power button ❶ to turn on the TV. Set the AIR/CATV menu option to AIR or CATV (see page 12). The antenna, cable, etc. must be connected before memorizing channels. Press the MENU button ❷; the MENU screen will appear.
Press the VOLUME UP (k) 1/DOWN (o) 2 buttons to select SETUP. Press the CHANNEL DOWN (m) 3 button to enter, then press the CHANNEL UP (i) 4/DOWN (m) 3 buttons to select MEMORIZE CHANNELS.
3
4
Press the VOLUME UP (k) button to confirm. The TV will automatically cycle through all the channels and store active channels into memory.
Press the MENU button twice or wait 20 seconds to exit the menu.
FAQs:
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable company, or local area, provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL UP (i)/DOWN (m) buttons? Yes, the channels must be programmed into memory.
Can I stop memorizing the channels?
Yes, simply press the MENU button.
14