PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the
4
Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
1
Connect the power cord to a standard AC outlet.
2
Press the POWER button to turn on the TV.
3
Press the MENU button so that the menu display appears on the TV screen.
4
Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5
Select "ENGLISH" or "ESPAÑOL" = Spanish by using the VOL(ume) ▲ or ▼ button.
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
●The TV distinguishes between standard TV channels and cable (CATV) channels.
●When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen.
●When you press the CH(annel) ▲ or ▼ button after
selecting AUTO MEMO, the tuner will stop at the memorized channels only.
●The TV may detect TV channels as CATV channels
if the receiving conditions are poor. In this case, try AUTO MEMO action again when receiving conditions are better.
[ADD/DELETE FUNCTION]
ADD/DELETE
AUTO MEMO
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
6
Press the MENU button to exit the menu.
CHANNEL PRESETTING
NOTE:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button. To preset a channel or to change a preset channel, follow the procedure below.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
3)Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4)Use the CH(annel) ▲ or ▼ button to select the
channel you wish to put into memory or to erase from memory. Note: The display will return to a normal screen in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.
ADD/DELETE AUTO MEMO
1
Press the POWER button to turn on the TV.
2
Press the MENU button so that the menu display appears on the TV screen.
3
Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET". Then, press the VOL(ume) ▲ button.
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
PICTURE CHANNEL SET [ENGLISH]ESPAÑOL
●Press the VOL(ume) ▲ or ▼ button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory.
●Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical- ly when the power resumes.
OPERATIONS
WATCHING A TV PROGRAM | PICTURE ADJUSTMENT |
1)Press the POWER button to turn on the TV.
2)Select the desired channel with the CH(annel) ▲ or ▼ button.
3)Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4)Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function enables you to shut off the power without pressing the POWER button after a desired time period.
1)Press the POWER button to turn on the TV and press the SLEEP button on the remote control .
2) You may change the sleep time by pressing the SLEEP button on the remote control repeatedly. The timer can be set up to 90 minutes, 10 minutes each time the SLEEP button is pushed. (The timer display counts up and sleep timer will
be displayed on the screen when you press the SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the sleep time will be lost.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3)Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the VOL(ume) ▲ or ▼ button.
GAME MODE | Notes: | |
Set to the most suitable position for TV | ● "+" is achieved by pressing the VOL(ume) | |
GAME. | ▲ button and | |
[+] : ON | ▼ button. | |
● In the above steps, the picture adjustment | ||
BRIGHT | display will disappear from the TV screen | |
Adjust until the whitest parts of the picture are | automatically after about 10 seconds if you | |
as bright as you prefer. | do not press any buttons, even though you | |
[+] : increase brightness | may not be finished. Press the MENU and | |
VOL(ume) ▲ button so that "PICTURE" is | ||
CONTRAST | selected. Then, press the CH(annel) ▲ or ▼ | |
button repeatedly until the display returns to | ||
Adjust to increase or decrease contrast. | ||
the screen. | ||
[+] : increase contrast | ||
● If you adjust the other Picture control after | ||
you set the Game mode to [ON], the Game | ||
COLOR |
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro- grams, movies, news, prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
: Press the VOL(ume) ▲ or ▼ button.
1)Press the MENU button so that the menu display appears on the TV screen.
2)Press the CH(annel) ▲ or ▼ button to point to "CAPTION".
3)Press the VOL(ume) ▲ or ▼ button to select the mode you wish.
4)When done, press the MENU button to exit the menu.
Adjust to be brilliant or pale color. | mode is set to [OFF] automatically. If you | |
want to set the Game mode, reset it to [ON]. | ||
[+] : be brilliant color | ||
| ||
|
TINT
Adjust to obtain natural skin tones.
[+]: greenish tone
: Press the CH(annel) ▲ or ▼ button.
PICTURE | PICTURE | PICTURE | PICTURE | PICTURE |
CHANNEL SET | CHANNEL SET | CHANNEL SET | CHANNEL SET | CHANNEL SET |
[ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL | [ENGLISH]ESPAÑOL |
CAPTION [OFF] | CAPTION [ C1] | CAPTION [ C2] | CAPTION [ T1] | CAPTION [ T2] |
GAME MODE [+] | BRIGHT | [+] | COLOR | [+] | TINT | [+] | ||||||||||
OFF | ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|