Dukane None owner manual Indicators, Power Lamp Conditions Green Red

Maintenance and Troubleshooting

Indicators

The Power and Lamp indicators show the status of the projector. Before requesting repair, check the projector status using the chart below. If the problem cannot be resolved contact your dealer.

Power	Lamp	Conditions	Notes
(Green)	(Red)

Slow

flashing

On

On

On

Fast

flashing

Fast

flashing

Off	Stand by
	mode

Off On mode

Slow Cool-down

flashing mode

Fast Fan-fault

flashing mode

On Lamp-cover open

Fast High flashing temperature

Projector is ready to be turned on (normal)

Projector is on and operating normally

Projector is in cool-down mode and will not respond to user input (normal)

The projector has detected a problem with an internal fan, the lamp will shut off automatically, contact your dealer

T h e l a m p	c o v e r i s o p en	o r t h e r e i s
a problem	with the lamp.	If the lamp

door is closed and replacing the lamp does not correct the issue, contact your dealer.

The projector has overheated and shut the lamp off. Correct the over temp condition immediately.

1.Check that the ventilation slots are free from obstructions

2.Check the cleanliness of the air filter.

3.If the condition persists, contact your dealer

Slow	Slow	Lamp-fault	The lamp does not light., come back ”stand
flashing	flashing	mode	by mode”, and turn on the power button.

50