Use your pincode

If your television has been disconnected from the mains for 15–30 minutes, the television prompts you for the pincode when you switch it on. You may not be able to switch the television on immediately – wait approximately 30 seconds and try again.

IMPORTANT! If you are prompted for a pincode the first time you switch on your television, contact your Bang & Olufsen retailer.

When your television is switched on …

>Enter the code digits using the number buttons

or .

>Press GO when the last digit is entered.

>Your television starts up again.

Five incorrect entries will cause the television to shut down for three hours, during which operation is not possible.

If you have forgotten your pincode …

>Contact a Bang & Olufsen retailer to receive a ﬁve-digit mastercode.

>When the television prompts you for your pincode, press and hold to bring up the MASTERCODE menu.

>Entering the code digits using the number

buttons or and pressing GO will deactivate your pincode and reactivate your television.

To use the pincode system again …

>Follow the procedure for activating the pincode system.

PINCODE

0 . . .

next accept GO

MASTERCODE

0 . . . .

next accept GO

NOTE! Should you lose or forget your code, contact your Bang & Olufsen retailer. Your retailer can provide you with a mastercode, which disables your pincode.