Bang & Olufsen 41086 manual Speaker balance or combination Picture format

9

Speaker balance or combination	Picture format
If you connect loudspeakers to your	When you select a format yourself, the
television, you can adjust speaker balance	automatic format selection is deactivated,
and change the speaker combination at any	until you switch to a different channel or
time.	change source.

Picture formats to choose from

FORMAT 1 … For standard TV pictures. Three variations are available: 4:3, 15:9 and Panoramic view (for the largest picture).

Pres repeatedly to display
SPEAKER on Beo4	LIST
	SPEAKER
Press to adjust the balance
between the left and right
speakers
Press to select a speaker
combination	1 – 5
Press to remove SPEAKER from
the Beo4 display and return to	EXIT
the source you were using

Speaker combinations

SPEAKER 1 … Sound in the television speakers only.

SPEAKER 2 … Stereo sound in the two fornt speakers.

SPEAKER 3… The television speakers and the front speakers are active.

Press repeatedly to display	LIST
FORMAT on Beo4
	FORMAT
Press if you want to optimise the	GO
picture, or …
… press the number of the	1 – 3
desired picture format

If you have chosen Format 1 … Press or to select variations of this format

If you have chosen Format 1* or Format 2 …

Press or to move the picture up and down

Press to leave the FORMAT	EXIT
function

*Pictures in 4:3 format cannot be moved up and down.

FORMAT 2 … For letter-box pictures. When you select FORMAT 2, the picture is automatically adjusted vertically. This ensures that program names or subtitles – if these appear in the broadcasted picture – can be seen.

FORMAT 3 … For genuine 16:9 wide-screen pictures. FORMAT 3 is usually selected automatically. If this is not the case, you can select it yourself.

*NOTE! For further information about how to connect speakers to the television, refer to the chapter ‘Socket panel’ on page 40 in the Reference book.