Weber GOLD D, SILVER D, SILVER A dimensions Built in GAS Grill Dimensions, Locating Your Grill

SUMMIT®

SILVER A - SILVER D - GOLD D

BUILT - IN GAS GRILL DIMENSIONS

THIS GAS APPLIANCE IS DESIGNED FOR

OUTDOOR USE ONLY.

LOCATING YOUR GRILL

When determining a suitable location for your Summit® gas grill installation, give attention to concerns such as exposure to wind, proximity to traffic paths, and keeping any gas supply lines as short as possible. Never locate the Summit® gas grill in a garage, breezeway, shed, under an unprotected overhang, or other enclosed area. Locate the grill and structure so there is enough room to safely evacuate the area in case of a fire.

CLEARANCE FROM SURFACES OR STRUCTURES

WARNING: Clearance from any surface or structure is 24 inches from the back and sides of the grill. Refer to “Typical Gas Supply Installation” before starting installation.

WARNING: The structure, “island”, countertops, and adjacent work areas for the built-in grill installation must be built from non-combustable materials only.

NOTE: If you have questions on what materials are considered non-combustable, contact you local building materials supplier or fire department.

Any Surface

24 inches

		24 inches Any Surface
				Any
			24inches	Surface
27 inches min. for lid clearance
	Grill Frame

Note: For a countertop treatment: Recommended 3/4 inch overhang. Notch front edg for frame to fully slide in.

BUILT-IN STRUCTURE CUTOUT DIMENSIONS	WARNING: ALL COUNTERTOP FINISHED SURFACES
ALL DIMENSIONS ARE TO FINISHED SURFACES.	MUST BE CONSTRUCTED OF A NONCOMBUSTIBLE
	MATERIAL.

Built-In Cutout Dimensions

	27" Grill	39" Grill	Tolerances
A	30 1/4"	38 1/4"	+ 1/4" - 1/4"
B	34 1/4"	34 1/4"	+ 1/4"	- 1/4"
C	21"	21"	+ 1/4"	- 1/4"