Disconnecting the USB Cable (Windows®)
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off the camcorder.
When using Windows® 98/98SE
1Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of the camcorder.
●If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2
If the camcorder is connected to the PC correctly, the [Removable Disk] icon appears.
3
A menu appears.
4Click [Eject] in the menu.
The [Removable Disk] icon disappears.
●If the icon does not disappear, wait for a while, and then proceed to step 5.
5Disconnect the USB cable.
●If any message appears, click [OK].
6Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
When using Windows® 2000/Me
1Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor of the camcorder.
● If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2
The [Unplug or Eject Hardware] dialog box appears.
3Select [JVC DV Camera Storage] or [USB Disk], and then click [Stop].
● Windows® 2000 | ● Windows® Me |
The [Stop a Hardware device] dialog box appears.
— 12 —