Updating [Device Manager] (Windows®)
If the camcorder is connected to the PC with the USB cable before installing [USB Mass Storage Class driver] or [USB Stream driver], the installation might not be performed properly.
In this case, follow the procedure described below to update the [Device Manager] and install [USB Mass Storage Class driver] and [USB Stream driver] properly.
NOTE:
Disconnect any other USB audio devices from PC before performing the following procedure.
Installing [USB Mass Storage Class driver]
1Use the USB cable to connect the camcorder to the PC. ( pg. 9)
2Select [Start] – [Settings] – [Control Panel]. Double click the [System] icon.
3Windows® 98SE/Me: Select the [Device Manager] tab.
Windows® 2000: Select the [Hardware] tab and click [Device Manager].
4Delete [DV camera] or [JVC] in [Other devices].
5Disconnect the USB cable from the camcorder. Restart the PC.
6Load the provided
7Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
8Confirm the [Removable Disk] icon is displayed in [My Computer].
Installing [USB Stream driver]
1Use the USB cable to connect the camcorder to the PC. ( pg. 9)
2Select [Start] – [Settings] – [Control Panel]. Double click the [System] icon.
3Windows® 98SE/Me: Select the [Device Manager] tab.
Windows® 2000: Select the [Hardware] tab and click [Device Manager].
4Delete [USB Audio devices] in the [Sound, video and game controllers].
●Delete [DV camera] or [JVC] in [Other devices].
5Disconnect the USB cable from the camcorder. Restart the PC.
6Load the provided
7Use the USB cable to connect the camcorder to the PC.
Device driver is installed.
●Windows® 2000: When a warning message dialog box on digital signature appears, click [OK] to continue installation.
8Confirm the following devices are displayed in [Device Manager] by performing steps 2 – 3.
●[JVC Web Camera] in [Imaging Devices]
●[JVC DVCamera USB Microphone] in [Sound, video and game controllers]
— 8 —