Basic operation
•Input Block - You can block the input source with this function. For example, if you want to block AV input, just highlight [AV] and press [ENTER].The AV input will not be seen in the screen.
,Change Password = The first time you use this function, use the default password. If you want to change it, first enter the new password then enter the same password again.
. Clean All - This function will let you clean all the channels stored on this TV. Note: If you choose this function, all the programs you preset will be lost.
Appendix
Cleanin and Care
WARNING: Do not try to remove the cabinet from the back. Refer servicing to qualified service technicians.
To clean the TV screen:
1.Unplug the TV to avoid possible shock hazard.
2.Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet can cause damage to the TV.
3.Wipe off any excess moisture with a clean dry cloth.
4.Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish of the cabinet.
21