Automatic on/off switching

The transmitter features a convenient automatic on/off function. When an audio signal rea- ches the transmitter, it is switched on and the LED at the front of the transmitter lights up green. The LED also indicates that an accupack is being recharged. When a stethoset recei- ver or an accupack is inserted into a charging compartment, the LED lights up red.

Green LED	=	Transmitter ON
Yellow LED =		Transmitter ON, Accupack recharging
Red LED	=	Accupack recharging
LED not lit	=	Transmitter OFF

If there is no audio signal for about 3 minutes, the transmitter automatically switches off. The transmitter is now in stand-by mode, its power consumption is very low so that it can remain connected to the mains.

Important

The transmitter’s charging function is independent of the automatic on/off function. Accu- packs can always be recharged when the transmitter is connected to the mains.

When you are not going to use the transmitter for some time (e.g. when you are on holiday), you should unplug the mains unit and take the stethoset receiver and the accupack out of their respective charging compartments.

Adjustments on your TV set

Please refer to the instruction manual of your TV set to find out whether the volume control also adjusts the headphone output or whether this output has a separate volume control. You will also find instructions on how to switch off the main loudspeakers.